Match eufy X9 Pro Replacement Parts
Direct answer: this 11-piece kit is for the eufy X9 Pro. Check the model on the robot, then match the 173 mm rubber rolling brush, four three-arm side brushes with 50 mm arms, two 167 × 75 × 12 mm filters and four 130 mm round mop pads.
What to match on the robot
| Part | What to match |
|---|---|
| Rolling brush | 173 mm rubber roller under the brush cover |
| Side brushes | Three-arm brushes, 50 mm arms, press onto the side post |
| Filter | 167 × 75 × 12 mm, seat in the dustbin |
| Mop pads | 130 mm round pad, centre hole over the mop-plate hub |
Turn the robot over. Open the brush cover and seat the 173 mm rubber roller. Press each three-arm side brush onto the side post. Swap the filter in the dustbin. Stretch a 130 mm mop pad onto the mop plate, centre hole over the hub.
When to swap the parts
Swap the roller, side brushes, filter and mop pads when they are worn, hair-wrapped or no longer picking up at the edges.
What is in the kit
One rolling brush, four side brushes, two filters and four mop pads — 11 pieces. Read the model on the robot before you order.
The 11-piece kit
This kit is for the eufy X9 Pro. Review the eufy X9 Pro replacement kit after you have read the model on the robot.
If several consumables are ageing together, the kit vs single parts comparison will help you decide whether a bundle is practical. For timing, use the replacement schedule.